Stone edge chamfering machine simple knowledge introduction
Publish:2022-11-29 View:637
A single stone edging and chamfering machine can not only grind the end face of the stone, but also process the small face of a variety of stone edging and chamfering machine. It has the function of multi-purpose. Its main function is to polish and chamfer the end face of the molding sheet. According to the number of grinding heads and the continuity of processing, it can be divided into single machine and continuous grinding and chamfering machine.

The continuous edge grinding and chamfering machine is applied in the last process of the standard plate production line, grinding and chamfering the four sides of the plate, with a high degree of automation and high production efficiency. In addition, the continuous edge grinding chamfering machine is divided into marble edge grinding chamfering machine and granite edge chamfering machine according to different processing plates. Continuous edging chamfering machine has running speed, high precision and low reject rate. Marble automatic edging and chamfering machine edging and chamfering is a process of processing marble standard plate or stone brick before packaging. This process is mainly for the stone plate four end faces into the chamfering and edge grinding.

Marble automatic edge grinding chamfering machine is mainly composed of two parts: the part is chamfering and edge grinding part, the second part is polishing part.

Part is mainly composed of grinding head mechanism, plate conveying device, slotting device and so on. The overall frame is made of section steel welded into the main body and fixed to the ground. The main shaft grinding head is installed on the frame, and the grinding head and chamfer are divided into two groups to process the two horizontal and two vertical edges of the plate respectively. Grinding head mechanism: composed of two grinding heads, chamfering two opposite sides of the plate. Two spindles are installed on both sides of the conveyor belt, and the working pressure of the spindles on the side of the plate is adjusted by the cylinder. Plate conveying device: the plate placed on the conveyor belt can rotate horizontally, the plate is transported by the rubber conveyor belt, the conveyor belt is trapezoid and driven by the hydraulic reducer, the speed of the conveyor belt can be adjusted through the reducer. Slotting device: Two or more diamond saw blades are installed at the bottom of the conveyor belt of the equipment. When the stone plate passes through the saw blade, the underside of the plate can be slotted by this device, and the depth of the slotting can be determined by adjusting the height of the saw blade. A control cabinet is installed on the side of the mill frame to monitor the machining process. The speed of the plate conveyor belt is automatically adjusted according to the plate ruler displayed on the control cabinet. During constant length grinding and chamfering, the conveying speed of the plate in the conveyor belt can be adjusted by the hydraulic transmission and displayed by the display in the control cabinet

The second part mainly consists of conveyor belt, hair dryer, dryer, cleaning machine and so on. The transmission belt is driven by the motor, and the four sides of the processed plate is driven by the conveyor belt for subsequent auxiliary processing. When the plate passes through the blowing area, the fan will scrape and blow the top and bottom of the plate, remove the grinding debris and impurities on the surface of the plate, and then the plate will continue to move to the drying area. The drying area consists of a 1m long stainless steel sheet outer cover, in which a resistance heater and a hot air circulating machine are installed to dry the surface of the sheet. The sheet continues to move forward on the conveyor belt, and the surface is swept by the cloth wheel.

There are two rotary cloth wheel brushes in the cleaning area, which can be cleaned by manually adjusting the pressure. There is also a control cabinet on the side of the second part of the support. The transportation of the whole standard board is carried out by the electric motor driven roller, and then by the roller driven conveyor belt. The speed of the conveyor belt is adjusted by the transmission, and the guide rail of the plate can also be manually adjusted. The electric control cabinet is equipped with a control switch and connected with the motor of each equipment through a cable. In addition, there are cooling water and pneumatic control system, and some edge chamfering machine is also equipped with waxing device.


0086 592 2037326